Battery Replacement Procedure - Fluke 1550C Calibration Manual

1550C/1555
Calibration Manual

Battery Replacement Procedure

For safe operation and maintenance of the product:
•
•
•
•
•
•
To prevent possible damage to the product or to equipment
under test:
•
•
•
•
•
•
•
•
•
•
16
Batteries contain hazardous chemicals that can cause burns
or explode. If exposure to chemicals occurs, clean with
water and get medical aid.
Remove all probes, test leads, and accessories before the
battery door is opened.
Remove all probes, test leads, and accessories before the
case is opened.
The battery door must be closed and locked before you
operate the product.
Use only specified replacement fuses and batteries.
Do not disassemble the battery.
Do not attempt to repair or service the product unless
qualified to do so and you have the relevant calibration,
performance test, and service information.
Remove batteries to prevent battery leakage and damage to
the product if it is not used for an extended period.
Be sure that the battery polarity is correct to prevent battery
leakage.
Repair the product before use if the battery leaks.
Do not disassemble the battery.
Do not short the battery terminals together.
Keep cells and battery packs clean and dry. Clean dirty
connectors with a dry, clean cloth.
Do not disassemble or crush battery cells and battery
packs.
Do not keep cells or batteries in a container where the
terminals can be shorted.
Do not put battery cells and battery packs near heat or fire.
Do not put in sunlight.
Warning
Caution