How To Contact Fluke; Safety Information - Fluke 1550C Calibration Manual

1550C/1555
Calibration Manual

How to Contact Fluke

To contact Fluke, call one of the following telephone numbers:
•
•
•
•
•
•
•
Or, visit Fluke's website at www.fluke.com.
To register your product, visit http://register.fluke.com.
To see, print, or download the latest manual supplement, visit
http://us.fluke.com/usen/support/manuals.

Safety Information

A Warning identifies conditions and actions that pose hazard(s) to the user; A Caution
identifies conditions and procedures that could cause Product damage, equipment under
test damage, or permanent loss of data.
To prevent possible electrical shock, fire, or personal injury:
•
•
•
•
•
•
•
•
2
Technical Support USA: 1-800-44-FLUKE (1-800-443-5853)
Calibration/Repair USA: 1-888-99-FLUKE (1-888-993-5853)
Canada: 1-800-36-FLUKE (1-800-363-5853)
Europe: +31 402-675-200
Japan: +81-3-3434-0181
Singapore: +65-738-5655
Anywhere in the world: +1-425-446-5500
 Warning: Read before product use.
Read all safety Information before you use the product.
Before and after testing, confirm that the product does not
indicate the presence of a hazardous voltage, see Figure 2.
If the product beeps continuously and a hazardous voltage
is shown on the display, remove power from the circuit
under test or allow the installation capacitance to fully
discharge.
Use the product only as specified, or the protection supplied
by the product can be compromised.
Connect the common test lead before the live test lead and
remove the live test lead before the common test lead.
Do not disconnect the test leads before a test has been
completed and the test voltage at the terminals has returned
to zero. This ensures that any charged capacitance is fully
discharged.
Disconnect power and discharge all high-voltage capacitors
before you measure resistance or capacitance.
Do not work alone.
Do not use the product around vapor, or in damp or wet
environments.