Smeg ALFA141VE Instruction Manual page 6

2.3
Connect the water inlet socket on the
back to a water socket with a threaded
¾ gas opening, taking care to screw it
tightly to the hose.
If the water piping is new or has been
unused
connection, run the water to make sure
it becomes clear and free of impurities.
Without this precaution, there is a risk
that the water inlet will become
clogged
appliance.
It is recommended to supply the oven
with water pressure between: min. 50
kPa and max. 500 kPa.
2.4
Depending on the model, there are two
outlet pipes on the back of the oven for
releasing the steam produced during
cooking. These must be left free of
any
them.
26
Instructions for the installer
Connection to the water mains (only in the steam model)
for a long
causing damage
Steam outlet pipe
obstruction. Avoid
time, before
to the
crushing
a a a a a a a a a a a
a a a a a a a a a a a