Chapter1: Safety And Standard; Important Safety Information; Safety And Warning Symbols - Delta HPP-1K5A01KAT User Manual

Pulsed dc power supply continuous 325 - 1000vdc
Table of Contents

Advertisement

Chapter1: Safety and Standard

1.1. Important Safety Information

To keep your safety from hazardous and fatal circumstance, please read and realize the content
of this manual before installing and operating Delta "HPP-series" power supply.

1.2. Safety and Warning Symbols

The following advisory symbols as shown in Table 1.1 will be used in the manual for different
level of warning. The meanings of the advisory symbols are explained below.
The following advisory symbols as shown in Table 1.2 are used on safety warning labels, and/or
on printed circuit board (only provided with white paint), and/or other part of the generator. The
meanings of these symbols are explained as below.
Table 1.1 Safety and Warning Symbols (1)
This danger symbol advises that improper operation will cause
serious personal injury or death.
This warning symbol advises that improper operation will
cause serious personal injury, or catastrophic damage the
generator or any electronic devices connected to the
generator, or lose important data.
This caution symbol advises that improper operation will cause
personal injury, or damage the power supply or any electronic
devices connected to the power supply, or lose data.
Table 1.2 Safety and Warning Symbols (2)
Dangerous voltage symbol indicates the presence of high
voltage. Access the high voltage will cause serious personal
injury or death.
To protect against electrical shock in case of a fault. This
symbol indicates that the terminal must be connected to
ground before operation of equipment.
Residual voltage:
Wait 8 minutes at least for capacitor discharge after power cord
is removed and before servicing.
1.

Advertisement

Table of Contents
loading

Table of Contents