Toshiba RAV-GM1101AT8P-E Service Manual page 68

No. Part name
Discharge
2 1. Detachment
port cabinet
1) Carry out work of 1 of
2) Remove screws for the discharge port cabinet
3) Remove screws for the discharge port cabinet
4) Remove screws of the discharge port cabinet
5) Remove screws of the discharge port cabinet
6) Remove screws of the discharge port cabinet
Side cabinet
3
1. Detachment
1) Carry out work of 1 of
2) Remove screws which fix the inverter
3) Remove screws of the side cabinet and the
4 Remove screws of the side cabinet and the
5) Remove screws of the side cabinet and the
6) Remove screws of the side cabinet and
7) Slide the side cabinet upward and then remove
Procedure
1 .
and the partition plate.
(ST1T Ø4 × 8, 3 pcs.)
and the bottom plate.
(Hexagonal screw Ø4 × 10, 2 pcs.)
and the motor base. (ST1T Ø4 × 8, 2 pcs.)
and the heat exchanger.
(ST1T Ø4 × 8, 1 pc.)
and the fin guard.
(Hexagonal screw Ø4 × 10, 2 pcs.)
.
1
assembly and the side cabinet.
(ST1T Ø4 × 8, 2 pcs.)
valve fixing plate. (ST1T Ø4 × 8, 2 pcs.)
pipe panel (Rear).
(Hexagonal screw Ø4 × 10, 2 pcs.)
bottom plate. (Hexagonal screw Ø4 × 10, 1 pc.)
the heat exchanger. (Hexagonal screw
Ø4 × 10, 3 pcs.)
it.
(Hook of inverter)
Heat exchanger
Valve fixing plate
- 68 -
FILE NO.SVM-18044-2
Remarks
Discharge port cabinet
Motor base Partition plate
Fin guard
Inverter assembly Side cabinet
Panel piping
(Rear)