Danfoss PVG 16 Installation Manual

Installation Guide
PVG 16
Electrical Actuating Module PVHC
Oliestrømmens retning for
standard monterede grupper
Oil flow direction for standard
assembled groups
Richtung des Ölstroms für
Standard-Baugruppen
Sens du débit pour ensembles
standard
Tekniske data
Technical data
Technische Daten
Caractéristiques Techniques
Oil viscosity
Olieviscositet
Range: 12 - 75 mm
Oil viscosity
Ölviskositet
Viscosité de huille
Filtering
Filtering in the Max. permissible degree of contamination
hydraulic system (ISO 4406), 1999 version): 23/19/16
Temperature
Ambient
Medium
PVHC er produceret i et miljø, hvor der benyttes mineralsk hydraulikolie
The PVHC is produced in an environment using mineral based hydraulic oil
Das PVHC wird in einer mineralbasierten Hydrauliköl-Umgebung produziert
Le PVHC est fabriqué dans un environnement qui utilise de l'huile hydraulique à base minérale
© Danfoss A/S, 2014-11
Parameter
Controller output
current range
Spool resistance
Pressure control range
/s [65 - 350 SUS]
2
Min.: 4 mm /s [40 SUS]
2
Max.: 400 mm /s [2130 SUS]
2
Temperatur range
Min: -30°C to 80°C [-22 to 176°F]
Max: -20°C to 80°C [-4 to 176°F]
L1407359 • Rev AB • Nov 2014
PVHC
PVB
PVP
12 V
0 - 1200 mA
1.0 Ω ± 5%
5 to 15 bar [72.5 to 217.5 psi]
Pilot pressure
Pilottryk (over tanktryk)*
Pilot pressure (over tank)*
Pilotdruck (über Tank)*
Pression pilote (resérvoir)*
*Anvendes sammen med hydraulisk aktiverede glidere
* Designed to be used with hydraulic activated spools
* Entworfen, um mit hydraulisch betriebenen Schieber verwendet zu werden
* Conçu pour une utilisation avec des tiroirs d'activation hydraulique
Max tank pressure
Port T Static
Port T Dynamic
Enclosure
Deutsch DT
P
A
7-9Nm
[61-79 lbf•in]
Q P A
max:
Q P B
max:
PVM
P301 776
Control range
24 V
0 - 600 mA
0.25 Ω ± 5%
Nom: 25 bar [363 psi]
Min: 21 bar [305 psi]
Max: 25 bar [363 psi]
25 bar [363 psi]
30 bar [435 psi]
Protection class
IP 67
V310175.A
PVS
1