Servo Amplifier 400V - Mitsubishi Electric MELSERVO MRJ2S-B Instruction Manual

Operating elements
1.5.2

Servo amplifier 400V

Servo amplifier MR-J2S-60B4 to MR-J2S-200B4
Fig. 1-21: Servo amplifier MR-J2S-60B4 to MR-J2S-200B4
No. Name
Battery holder
Battery connector (CON1)
Display
Charge lamp
Station number (CS1)
Tab. 1-5: Operating elements and their meaning
MELSERVO J2-Super
CHARGE
LED1 LED2
Description
Contains the battery (optional) for absolute
position data backup.
Used to connect the battery.
The five-digit, seven-segment LED shows the
servo status and alarm number.
Lit to indicate that the main circuit is charged.
While this lamp is lit, do not reconnect the
cables
Switch to set the station number of the servo
amplifier.
SW1
Reference
Chap. 6
Section 6.1.4
Section 4.3
—
Section 3.9
Introduction
S001238C
1 - 17