Removing The Washer From Service - Maytag MFS80 Installation Instructions Manual

REMOVING THE WASHER FROM SERVICE

Disconnecting the Washer
1. Disconnect the washer from electricity.
2. Turn off power at the main switch on the rear of the washer.
3. Shut off the water and steam to the washer.
4. Disconnect all water and steam inlets.
5. Insulate the external electric power inlet conductors.
6. Place an "Out of Service" sign on the washer.
7. Unscrew any nuts (bolts) that may be securing the washer to
the floor.
8. During transportation, follow the instructions under
"Equipment for Handling, Transport, and Storage" in the
"Installation Requirements" section.
9. If the washer will not be used again, gently remove the door
with the hinge.
24
Disposing of the Washer
Scrap according to local codes.