SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual page 172

Smc networks gigabit ethernet switch management guide
Hide thumbs Also See for SMC8612XL3 F 1.0.1.3:
Table of Contents

Advertisement

C
ONFIGURING THE
Parameter
Transmit Multicast Packets The total number of packets that higher-level protocols
Transmit Broadcast
Packets
Transmit Discarded
Packets
Transmit Errors
Etherlike Statistics
Alignment Errors
Late Collisions
FCS Errors
Excessive Collisions
Single Collision Frames
Internal MAC Transmit
Errors
Multiple Collision Frames A count of successfully transmitted frames for which
3-118
S
WITCH
Description
requested be transmitted, and which were addressed to a
multicast address at this sub-layer, including those that were
discarded or not sent.
The total number of packets that higher-level protocols
requested be transmitted, and which were addressed to a
broadcast address at this sub-layer, including those that were
discarded or not sent.
The number of outbound packets which were chosen to be
discarded even though no errors had been detected to prevent
their being transmitted. One possible reason for discarding
such a packet could be to free up buffer space.
The number of outbound packets that could not be
transmitted because of errors.
The number of alignment errors (missynchronized data
packets).
The number of times that a collision is detected later than 512
bit-times into the transmission of a packet.
A count of frames received on a particular interface that are
an integral number of octets in length but do not pass the FCS
check. This count does not include frames received with
frame-too-long or frame-too-short error.
A count of frames for which transmission on a particular
interface fails due to excessive collisions. This counter does
not increment when the interface is operating in full-duplex
mode.
The number of successfully transmitted frames for which
transmission is inhibited by exactly one collision.
A count of frames for which transmission on a particular
interface fails due to an internal MAC sublayer transmit error.
transmission is inhibited by more than one collision.

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8612xl3 - annexe 1Tigerswitch smc8612xl3

Table of Contents