Flash/File Commands - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

the factory default configuration file, but you cannot use it as the
destination.
• To replace the startup configuration, you must use startup-config as
the destination.
• The Boot ROM and Loader cannot be uploaded or downloaded from
the TFTP server. You must use a direct console connection and access
the download menu during a boot up to download the Boot ROM (or
diagnostic) image. See "Upgrading Firmware via the Serial Port" on
page B-1 for more details.
Example
The following example shows how to upload the configuration settings to
a file on the TFTP server:
Console#copy file tftp
Choose file type:
1. config: 2. opcode: <1-2>: 1
Source file name: startup
TFTP server ip address: 10.1.0.99
Destination file name: startup.01
TFTP completed.
Success.
Console#
The following example shows how to copy the running configuration to a
startup file.
Console#copy running-config file
destination file name: startup
Write to FLASH Programming.
\Write to FLASH finish.
Success.
Console#
F /F C
LASH ILE OMMANDS
4-87