System Status Commands; Show Startup-Config - SMC Networks SMC8612XL3 F 1.0.1.3 Management Manual

C L
OMMAND INE

System Status Commands

Command
show
startup-config
show
running-config
show system
show users
show version

show startup-config

This command displays the configuration file stored in non-volatile
memory that is used to start up the system.
Default Setting
None
Command Mode
Privileged Exec
Command Usage
• Use this command in conjunction with the show running-config
command to compare the information in running memory to the
information stored in non-volatile memory.
• This command displays settings for key command modes. Each mode
group is separated by "!" symbols, and includes the configuration mode
command, and corresponding commands. This command displays the
following information:
- SNMP community strings
- Users (names and access levels)
4-78
I
NTERFACE
Function
Displays the contents of the configuration file (stored
in flash memory) that is used to start up the system
Displays the configuration data currently in use
Displays system information
Shows all active console and Telnet sessions,
including user name, idle time, and IP address of
Telnet clients
Displays version information for the system
Mode Page
PE 3-78
PE 3-79
NE, 3-82
PE
NE, 3-83
PE
NE, 3-83
PE