Table of Contents
Advertisement
Fetching Files from Other Servers
You can use the TFTP server as a client to receive files from other
TFTP servers.
To start a transfer session:
1. Choose Read File From... from the Service menu.
2. A dialog box will appear requesting additional information.
Check the box Keep File Upon Failure to save a partial file transfer.
The required parameters are defined below.
Parameter
Target Node
Remote Filename
Local Filename
Keep File Upon Failure
Telneting to Other Computers on the Network
Telnet is a TCP/IP application protocol that allows you to access a remote computer system (e.g., a UNIX or SUN
workstation) as though you were attached locally via a serial terminal. As long as you have a user account on the
target system and the necessary user privilege, you can execute any text command.
If you require frequent access to a particular workstation, you may want to include it in your network map as an IP
Node.
To telnet into a workstation using your network map:
1. Select the appropriate IP node from the network map with your mouse.
2. Open the Tools menu under the main EliteView window and click on Telnet.
3. Log into the remote workstation.
Table 5-6 TFTP Read File
Description
IP address of the target TFTP server. This is the source of the original
file.
The file you want from the TFTP server. The path is restricted to the
EliteView public directory for security reasons.
Name of the file after it has been received.
Click on this check box to save partial results when file transfer fails.
T
O
ELNETING TO
THER
C
N
OMPUTERS ON THE
Example
192.74.255.74
SNMPDRV.BIN
SNMPDRV.BIN
ETWORK
5-9
Advertisement
Table of Contents
