Table B-15 Trigger Event Parameters - SMC Networks EliteView 6.20 Management Manual

Parameter
event=
Active_Flag
Event_Name
Example: Sample of specific trap entry
[Ent1.1]
message=Temperature over 65 degrees
event=1,Trap
[Ent1.2]
message=Port auto-partitioned
event=1,Trap
[Ent1.3]
message=Port bad link
event=1,Trap
[Ent1.4]
message=Hub %b collision count over %a
event=1,Trap
a=groupTotalCollisions,v
b=groupTotalCollisions,i5
[Ent1.5]
message=Hub %b alignment error count over %a
event=1,Trap
a=groupFAEErrors,v
b=groupFAEErrors,i5
[Ent1.6]
message=Hub %b CRC error count over %a
event=1,Trap
a=groupCRCErrors,v
b=portCRCErrors,i5
[Ent1.7]
message=Port(%b,%c)length < 64 bits count over %a
event=1, Trap
a=portPygmys,v
b=portPygmys,i5
c=portPygmys,i6

Table B-15 Trigger Event Parameters

The event to trigger.
Select either 1 or 0; 1=Active, 0=Disabled.
Name of the event or trap to trigger.
Description
I TRAP.INI F
NSIDE THE ILE
B-15