Specific Trap Sections; Table B-14 Trap Message Parameters - SMC Networks EliteView 6.20 Management Manual

C E V
USTOMIZING LITE

Specific Trap Sections

Each specific trap is defined in a section of its own. The section name takes the following format:
[Ent(n).(m)]
where:
(n)
(m)
To edit specific traps:
1. Define trap message using the following format:
message=string
The string variable can be any character string with some components generated from the information in the
variable list. You can use variables in the form of %x, where x is any letter from a to z.
2. Define variables generated from trap messages using the following format:
x=Object_name,Symbol
The following table describes each item:
Parameter
x=
Object_name
Symbol
3. Define the event to trigger using the following format:
event=Active_Flag,Event_Name
The following describes each item:
B-14
IEW
is the sequence number of the enterprise
is the specific trap number

Table B-14 Trap Message Parameters

Variable name, any letter from a to z.
MIB object name defined in the MIB database.
A symbol used to identify the use of a value or index in the object name.
• The variable binding uses the format object.instance (where instance is
the index of a table entry if a table is being referred to); and is equal to "0"
for single value variables.
• You can use the value of the variable, which is represented with "v" or
one of the indices.
• The indices are represented as a list of numbers. Long indices like the IP
address take four numbers. The format for indices is in, where n is a
positive number, e.g., i2
Description