Table 8-2 Event Data - SMC Networks EliteView 6.20 Management Manual

Parameters Description
Date Date when the event occurred
Time Time when the event occurred
Device IP network address of the device
.
Description Text from "Write into database"
3. Click the Close button to close the Event Data window.
To erase some or all event information:
1. From the Event Data window, select the target event line. To delete all event information, click the Select All
button. The selected entries are highlighted.
2. Click on the Delete button to delete highlighted events.
To print information from the event database:
1. From the Event Database window, click on the Print button.
2. Select the required events.
3. To set the print pointer at the beginning of the database, mark the radio button for From Beginning. To set the
pointer at the location where the last print operation terminated, mark the radio button for From Last Printed
Data.
4. Edit the From and To times if required.
5. Use the Print Setup button to verify your printer settings.
6. Press the Print button and then press Close.
Note: Event logs may be viewed by any application that can import a dBASE (.DBF) file, such as FoxPro.

Table 8-2 Event Data

Example
05/16/2004
13:33:48 (1:33 pm)
192.9.211.52
Dropped server
connection
D E A
EFINING VENT CTIONS
8-5