Table of Contents
Advertisement
CABINET
INVACARE 3LX, INVACARE - 5LX/5LXO2/5LXO2T AND INVACARE - 6LXO2/6LXO2T
PROCEDURE 1 - REMOVING CABINET (FIGURE 1)
TO PREVENT ELECTRICAL SHOCK, ALWAYS DISCONNECT CONCENTRATOR FROM
ELECTRICAL OUTLET BEFORE SERVICING.
1. Unplug unit.
2. Remove the eight (8) mounting screws that secure cabinet assembly to the base assembly.
3. Lift the cabinet straight up.
NOTE: When required, vacuum inside of the cabinet and exposed foam insulation.
4. To re-install cabinet, reverse STEPS 2-3.
REPAIR / REPLACEMENT GUIDE
CAUTION
Mounting Screws (8 each)
FIGURE 1 - REMOVING CABINET
21
PROCEDURE 1
Cabinet Assembly
Base Assembly
C
A
B
I
N
E
T
Advertisement
Table of Contents
