Hardware Installation - SMC Networks Barricade SMCBR14UP User Manual

Port Type
5 VDC
WAN
Port 1–4
USB
PRINTER

5 | Hardware Installation

The router can be placed anywhere in your office or home. No special wiring or cooling
requirements are necessary. However, you should comply with the following guidelines:
• Place your router on a flat, horizontal surface
• Be sure to place your router away from any heating devices
• Avoid dusty and/or humid areas
1) Setup LAN Connection: Connect an Ethernet cable from your computer's Ethernet port to one of
the LAN ports of the router.
2) Step WAN Connection: Insert one end of the Ethernet cable into the WAN port on the back panel
of your router, and the other end to the cable/DSL modem. You may connect an analog modem
(optional) to function as a backup connection.
3) Power Up: The router automatically enters the self-testing phase once the power cord is plugged
into a wall outlet. When in self-testing phase, the M1 indicator LED illuminates for about five
seconds to indicate proper connection. The M1 LED flashes twice as soon as the self-testing phase
is completed. After the completion of the self-testing phase, the M1 LED should flash once per
second to indicate that the router is functioning properly.
11
Description
Receptor for power adapter:
5 VDC, 2 A (minimum)
This is the connection for the Ethernet cable to the
Ethernet port on the cable or DSL modem
These are the connections for Ethernet cables to your
Ethernet enabled computers
USB Ports for USB printer
DB25 Printer Port