Installing The Printe Server Monitor For Windows Xp, 2000, Nt - SMC Networks Barricade SMCBR14UP User Manual

8.2 | Installing the Print Server Monitor for Windows XP, 2000, NT
N OTE
•
These instructions assume that the printer has previously been installed on the computer. This is
necessary to ensure that the printer drivers have been installed and are working
•
Screen shots shown have been taken from Windows XP but differ only slightly
W indows 2000. The instructions will highlight any important differences.
Inst li al ng the Printer Monitor Software
Step 1 – Insert the CD
O nce inserted the CD will load automatically and display a screen similar to that shown below.
Step 2 – Select Install Printer Drivers
Select Install Printer Server (2000/XP Users). This will load another window.
This will load the printer port software required to op ate the print server from Windows XP, 2000, NT.
Step 3 – Installing the Software
Follow the three simple pages of the installation wizard. No information is required to be entered.
Press Finish on the last screen to comp
Step 4 – Restart your computer
49
er
lete the wizard and return to the previous screen.
correctly.
from those used in