Map Operation And Settings - Mercedes-Benz COMAND Online Supplement Manual

Moving the map
Showing the crosshair
X
To hide the menu: slide ZV the COMAND
controller and, when the
menu item is shown, press W.
X
To move the map: slide XVY, ZVÆ or
aVb the COMAND controller.
A crosshair appears on the map. If you slide
it again, the map moves in the correspond-
ing direction under the crosshair.
Map with crosshair
Current vehicle position
:
Crosshair
;
Details of the crosshair position
=
Map scale selected
?
Display = may be the name of a street, for
example, provided the digital map contains
the necessary data. Alternatively, it may show
the geo-coordinate position of the crosshair
Geo-coordinates
if the
on ( Y page 100).
Hiding the crosshair and centring the
map on the vehicle position or destina-
tion
X
Press the % back button twice.
The crosshair disappears and the map is
set to the vehicle position.
or
X
Set the map to the vehicle position; see the
explanation below.
Full screen
display is switched

Map operation and settings

Centring the map on the vehicle or
destination position
Centring the map on the vehicle posi-
tion
X
To show the menu: press W the COMAND
controller.
X
Position
Select in the navigation system
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
X
Vehicle position map
Select
W to confirm or, if the crosshair is shown,
press the % back button.
This hides the crosshair.
Centring on the destination
This function requires that a route to a desti-
nation has been calculated. If the route
includes waypoints and an intermediate stop,
the map can also be set to these positions.
X
To show the menu: press W the COMAND
controller.
X
Position
Select in the navigation system
menu bar by sliding VÆ and turning cVd
the COMAND controller and press W to
confirm.
X
Destination position map
Select
press W to confirm.
The crosshair position is set to the relevant
destination.
Map settings
Calling up the map settings menu
X
To show the menu: press W the COMAND
controller.
X
Navi
Select in the main function bar by
sliding ZV and turning cVd the COMAND
controller and press W to confirm.
97
and press
and
Z