Basic Functions Of Comand - Mercedes-Benz COMAND Online Supplement Manual

Cursor in the next data field
:
To store an entry
;
4 and 5 icons to select a data field
=
Option 2
X
Slide ZV the COMAND controller repeat-
edly until the character bar disappears.
X
Select the data field by sliding ZVÆ and
press W to confirm.
Storing an entry
X
Select ¬ in the character bar by turning
cVd the COMAND controller and press
W to confirm.
The entry is stored in the address book.
Further functions available in the char-
acter bar
X
To switch the character bar to upper/
lower-case characters: select * or
E and press W to confirm.
X
To switch the character set: select
p and press W to confirm.
The character set switches between
upper/lower-case letters and digits.
X
To change the language of the charac-
ter bar: select B and press W to con-
firm.
X
Select the language by turning cVd the
COMAND controller and press W to con-
firm.

Basic functions of COMAND

X
To reposition the cursor within the data
field: select 2 or 3 and press W to con-
firm.
Cursor (repositioned)
:
2 and 3 icon to reposition the cursor
;
X
Delete the character/entry (
Basic functions of COMAND
Switching COMAND on/off
X
Press the q control knob.
A warning message appears. COMAND
calls up the previously selected menu.
i If you switch off COMAND, playback of
the current audio or video source will also
be switched off.
29
Y page 26).