Vehicle Equipment; Display Settings - Mercedes-Benz COMAND Online Supplement Manual

Time settings
42

Vehicle equipment

i These Operating Instructions describe all
standard and optional equipment available
for your vehicle at the time it was pur-
chased. Please note that your vehicle may
not be equipped with all features descri-
bed.

Display settings

Setting the brightness
The brightness detected by the display light
sensor affects the setting options for this
function.
X
Press the W button.
X
Settings
Select
COMAND controller and press W to con-
firm.
X
Display
Select
X
Brightness
Select
firm.
X
Adjust the brightness by turning cVd the
COMAND controller and press W to con-
firm.
Display design
Your COMAND display features optimised
designs for operation during daytime and
night-time hours. You can customise the
by turning cVd the
and press W to confirm.
and press W to con-
design by manually selecting day or night
design or opt for an automatic setting.
X
Press the W button.
X
Settings
Select by turning cVd the
COMAND controller and press W to con-
firm.
X
Display
Select and press W to confirm.
X
Day design,
Select
Automatic
by turning cVd the COMAND
controller and press W to confirm.
A dot indicates the current setting.
Design Explanation
Day design
The display is set perma-
nently to day design.
Night design The display is set perma-
nently to night design.
Automatic
When the
setting is selected,
COMAND evaluates the
readings from the auto-
matic vehicle light sen-
sor and switches
between the display
designs automatically.
Time settings
General information
If COMAND is equipped with a navigation sys-
tem and has GPS reception, COMAND auto-
matically sets the time and date. You can also
adjust the time yourself in 30-minute incre-
ments, but the date cannot be changed.
i If you set the time in 30-minute incre-
ments, any time zone settings and settings
for changing between summer and stand-
Y
ard time are lost (
Night design
or
Automatic
page 43).