Reversing Camera - Mercedes-Benz COMAND Online Supplement Manual

LED dis- Status
play
Green The headphones are switched
on and connected to a screen.
Flashes The headphones are estab-
green lishing the connection to a
screen.
Red The headphones are switched
on and the batteries are
almost discharged.
No display The headphones are switched
(dark) off or the batteries are dis-
charged.
Connecting additional headphones
You can connect one additional set of corded
headphones to each of the two rear screens
( Y page 35). The socket is designed for head-
phones with a 3.5 mm stereo jack plug and
an impedance of 32 ohms.
Changing batteries
Batteries are required for the remote control
and for the two sets of cordless headphones.
For changing batteries: (

Reversing camera

G
Risk of accident
The reversing camera is designed to assist
you when reversing.
Please observe the corresponding safety
notes in your vehicle's Owner's Manual.
If your vehicle is equipped with a reversing
camera, its image is automatically relayed to
the COMAND display if the function is activa-
ted and you engage reverse gear.
If the function is activated, the COMAND dis-
play will automatically switch back to the pre-
Y page 244)
Reversing camera
viously selected display as soon as you shift
out of reverse gear.
i Further information on the reversing cam-
era driving system can be found in the vehi-
cle Owner's Manual.
X
Press the W function button.
The system menu appears.
X
Settings
Select by turning cVd the
COMAND controller and press W to con-
firm.
X
Rear view camera
Select
confirm.
X
Activation by R gear
Select
W to confirm.
The function is switched on O or off ª,
depending on the previous status.
39
and press W to
and press
Z