360° Camera; Settings - Mercedes-Benz Audio 20 Operating Instructions Manual

360° camera
42
Call up Vehicle Settings
X
To select Interior Lighting Delayed
X
Switch-off: turn and press the controller.
The setting element is active.
To change the delayed switch-off time: turn
X
the controller.
You can find further information on the inte-
rior lighting in the vehicle Operator's Manual.
Exterior lighting delayed switch-off
If you switch on the
Delayed Switch-off
lighting is switched on for a short time after
the engine is switched off. The light switch
must be set to à (see the vehicle Opera-
tor's Manual).
The exterior lighting remains on for
60 seconds after the engine is switched off. If
you close all the doors and the tailgate, the
exterior lighting switches off after the set
time.
Call up Vehicle Settings
X
To select Exterior Lighting Delayed
X
Switch-off: turn and press the controller.
The setting element is active.
To change the delayed switch-off time: turn
X
the controller.
360° camera
General notes
The 360° camera surveys the vehicle sur-
roundings and assists you, for example when
parking or at exits with reduced visibility.
The 360° camera is only an aid. It is not a
replacement for your attention to your imme-
diate surroundings. You are always responsi-
ble for safe maneuvering and parking. Make
sure that no persons or animals are in the
maneuvering range.
For more information on the 360° camera see
the vehicle Operator's Manual.
( page 40).
Y
Exterior Lighting
function, the exterior
( page 40).
Y
Displaying the 360° camera image
The 360° camera image can be displayed if:
your vehicle is equipped with a 360° cam-
R
era
the 360° Camera function is switched on;
R
see the vehicle Operator's Manual.
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To select 360° Camera: turn and press the
X
controller.
The 360° camera image appears in split-
screen mode.
You will see the previous view on the display
if, when the function is switched on:
you turn the SmartKey to position 1 in the
R
ignition lock
you select transmission position P
R
when you are driving at moderate speeds
R
Switching the display off manually
To select &: slide 6 and press the con-
X
troller.
Switching the display on automatically
You can automatically switch the 360 cam-
X
era display using reverse gear
( page 42).
Y
Switching the 360° camera auto-
matic mode on/off
This function activates the 360° camera
when reverse gear is engaged.
Press the Ø button.
X
or
Press Vehicle in the main function bar.
X
The vehicle menu is displayed.
To switch to the menu bar: slide 6 the
X
controller.
To select System Settings: turn and
X
press the controller.