Storage Area Network Configuration; Virtual Services Platform 9000 Configuration; Configuring Vlans Using The Acli - Avaya VSP 9000 Technical Configuration Manual

Avaya virtual services platform with coraid etherdrive srx-series storage appliances

Hide thumbs Also See for VSP 9000:

Table of Contents

4. Storage area network configuration

This section describes how to set up the following SAN components:



VSP 9000



PC servers



Coraid EtherDrive SRX-Series storage appliances

4.1

This section describes how to configure the VSP 9000. To allow for full utilization of the network for SAN

storage, Coraid recommends isolating SAN storage networks from other network traffic.



Note – The specific VLANS and ports used in this test setup have no special significance. You

can use whatever VLANs and ports you want.

4.1.1

Configure VLAN 100 and ensure that all ports connected to the Coraid HBAs and SRX-Series appliances

are in VLAN 100. The following steps show how to configure the VLAN using the ACLI:

Enter the Privilege Exec context:

VSP9000:1>enable

Enter the Global Configuration context:

VSP9000:1# configure terminal

Create the port based VLAN 100:

VSP9000:1(config)# vlan create 100 name SAN type port-mstprstp 1

Remove the ports from the default VLAN 1:

VSP9000:1(config)# vlan members remove 1 3/1-3/9,6/1-6/9

Add ports to the VLAN 100:

VSP9000:1(config)# vlan members add 100 3/1-3/9,6/1-6/9

Dec 2010

VSP 9000 with Coraid EtherDrive SRX-Series

Storage Appliances TCG

avaya.com

Table of Contents