Avaya ERS 2500 Technical Configuration Manual page 22

IDE Step 2 – Go to Site Configuration -> Provisioning -> Outbound Values -> New

Using the Outbound Attribute created in Step 1, we will first add a value of 7 (NAS
Prompt) for read-only-access. Start by entering a name via the Outbound Value Name:
window (i.e. ERSro as used in this example) and click on New. Select the Outbound
Attributes name created in Step 1 (i.e. Service-type-ERS as used in this example) via the
Choose Global Outbound Attribute: pull down menu. In the Value Unsigned – 32 bit
window, enter 7 (i.e. value of 7 signifies NAS Prompt for read-only-access). Click on OK
twice when done.

Go to Site Configuration -> Provisioning -> Outbound Values -> New again to create the
outbound attribute for read-write-access. Using the Outbound Attribute created in Step 1,
we will add a value of 6 for read-write-access. Start by entering a name via the Outbound
Value Name: window (i.e. ERSrwa as used in this example) and click on New. Select the
Outbound Attributes name created in Step 1 (i.e. Service-type-ERS as used in this
example) via the Choose Global Outbound Attribute: pull down menu. In the Value
Unsigned – 32 bit window, enter 6 (i.e. value of 6 signifies Administrative for read-write-
access). Click on OK twice when done.
Avaya Inc. – External Distribution
avaya.com
21