Avaya ERS 2500 Technical Configuration Manual page 33

IDE Step 5 – Go to Site Configuration -> Authenticators -> default
o
For example, we will create new container named Avaya Switch by right clicking default
and selecting Add Container.
o
Go to Site Configuration -> Authenticators -> default -> Avaya Switch and click on New
o
Enter a name for the switch via Name, add the switch IP address via IP Address,. select
Wired under Authenticator Type, select Nortel via Vendor, select ers-switches-nortel via
Device Template and remove the default check via Enable RADIUS Access.
o
Under the RADIUS Setting tab, uncheck the Enable RADIUS Access setting to disable
RADIUS – this is the default setting
o
Next, click on the TACACS+ Settings tab and check the Enable TACACS+ Access box and
add the TACACS+ Shared Secret.
o
Click on OK when done. The configuration should look something like the following
Avaya Inc. – External Distribution
avaya.com
32