Preface - Siemens SIMATIC IFP2200 INOX MT ETH Compact Operating Instructions

Preface

Scope of validity
These compact operating instructions apply to the following INOX device:
● SIMATIC IFP2200 INOX MT ETH, article number 6AV7485-6BE00-0AA0
The INOX device is based on the following standard device:
● SIMATIC IFP2200, article number 6AV7863-4MA20-0AA0
With regard to electronics and interfaces, the device is based on the Ethernet monitor
IFP2200 ETH with capacitive multi-touch screen and corresponding functionality. You can
find a description of the IFP2200 ETH in the operating instructions "Industrial Flat Panel
IFP1500, IFP1900, IFP2200, IFP1900 PRO, IFP1900 ETH, IFP2200 ETH
(http://support.automation.siemens.com/WW/view/en/65288650)", on which these compact
operating instructions are based.
The compact operating instructions provided here describe the technical differences as
compared to the IFP2200 ETH standard device.
Unless otherwise described in this document, all specifications in the underlying operating
instructions for IFP2200 ETH, which means specifications regarding hardware, software,
maintenance and service, apply to this device.
However, the information in these compact operating instructions take precedence over
statements in the underlying operating instructions, in the release notes and in the online
help.
Note
This document belongs to the device and will also be required for repeat commissioning.
Keep all supplied and supplementary documentation for the entire service life of the device.
Pass on all of these documents to a future owner of the device.
Siemens Drives & PLCs
IFP2200 INOX MT ETH
Compact Operating Instructions, 03/2018, A5E42185570-AA
3