Siemens SIMATIC IFP2200 INOX MT ETH Compact Operating Instructions page 31

Software license agreements
If the device is supplied with preinstalled software, you must observe the corresponding
license agreements.
UL approval
See the following notes:
● The device shall be supplied from an isolating source, rated 24 VDC.
● Only for use in LAN, not for connection to telecommunication circuits.
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
or
Underwriters Laboratories Inc., to
● UL 508 (Industrial Control Equipment)
● CSA C22.2 No. 142 (Process Control Equipment)
● ANSI/ISA 12.12.01 (Hazardous Location)
● CSA-213 (Hazardous Location)
Approved for use in
● Class I, Division 2, Group A, B, C, D T4 or
● Class I, Zone 2, Group IIC T4 or
● non-hazardous locations
FM Approval
Factory Mutual Research (FM) conforming to
● Approval standards FM 3611, FM 3600, FM 3810, ANSI/ISA 61010-1
● CSA C22.2 No. 213
● CSA C22.2 No. 61010.1
Approved for use in
● Class I, Division 2, Group A, B, C, D T4
● Class I, Zone 2, Group IIC T4
Siemens Drives & PLCs
IFP2200 INOX MT ETH
Compact Operating Instructions, 03/2018, A5E42185570-AA
Technical specifications
5.1 Certificates and approvals
31