Assembly Instructions; Assembling Cabinet - Skil 3700 Operating/Safety Instructions Manual

Assembly

Assembling Cabinet

From among the loose parts, locate the hardware needed for cabinet
assembly as shown on page 34.
1. Align front C1 and back C2 assembly with the bottom plate C3
between them and bolt together using 8 bolts C12 and nuts C11
as shown. (Fig 1)
2. Turn cabinet on it's side. Attach the support feet C6 to the
bottom of cabinet by inserting each bolt C9 through the support
foot, cabinet corner and base plate, then attach with nut C8.
Attach corner end caps C10 (Fig. 2)
FIG. 1
C12
FIG. 2
C2
C11
C1
3. Mount 4 shelf brackets C7 to the left-hand side of the inside of
the cabinet. Line up brackets with tabs/holes at the back and
front of the cabinet. Insert bolts C12 and secure with the nuts
C11 provided. (Fig. 3)
4. Mount 2 shelf brackets C7 to the right-hand side of the inside of
the cabinet. Line up brackets with tabs/holes at the back and
front of the cabinet. Insert bolts C12 and secure with the nuts
C11 provided. (Fig. 3)
C3
FIG. 3
C12
40.
C7
C11