Installing/Replacing Fixed/Folding Backrest; Installing/Replacing Recliner Backrests - Invacare Action 3 NG Service Manual

Backrest Cane
Back Cane
Bracket
Removing/Installing different type of Backrests
Re cline r bac k re st ( Mech a nic a l a nd Gas strut v ersions)
NOTE: For this procedure, refer to FIGURE 4.8.
To Install the Recliner backrest, reverse this procedure from STEP 1 to 3.
1. Remove the back-cane bracket. Refer to Removing Back-Cane Bracket paragraph.
2. Pull up on the seat upholstery.
3. Remove the two mounting screws and locknuts that secure the back-cane bracket
to the wheelchair frame.
4. Install the new set including the appropriate backrest upholstery
NOTE: Both back canes should be set to the same adjustment hole.
Backrest Cane
Back-Cane
Bracket
Mounting
Screws
FIGURE 4.7 Fixed/Folding Backrest
Mounting
Screws
FIGURE 4.8 Recliner Backrests
2 1
SECTION 4—SEAT/BACK