Use Of Local User Interface; Input Of Alphanumeric String (Input Example) - Siemens SITRANS TF280 WirelessHART Operating Instructions Manual

Operation

5.5 Use of local user interface

5.5 Use of local user interface
5.5.1

Input of alphanumeric string (input example)

Principle
Alphanumeric values, e.g. the device name, are entered character-by-character. When you
open the setting option, the first character is focused and can be changed.
● Select the desired character by pressing the ↑ or ↓ key.
● The cursor is moved forward by one digit by pressing the M key. The selected character
Procedure
The device name "MSK-012E" is to be entered.
1. Open the parameter to be changed, in this case: "2.2 Device name" (Page 47)
2. Enter the first character:
3. Repeat step 2 until the desired string is complete. Following input of the eighth character,
4. Leave input option. Press the M key.
38
is applied.
Select/change: Press ↑ or ↓ key until the letter "M" is displayed.
Retain/apply: Press M key. Reaction: the cursor moves on.
the cursor is positioned on the Enter symbol.
MSK-012E
SITRANS TF280 WirelessHART
Operating Instructions, 10/2010, A5E02619566-02