Bowflex BXT6 Service Manual page 29

Belt Alignment / Slipping / Hesitation
BEGIN HERE
Adjust the Walking Belt
tension
Is the issue still
Issue resolved
Issue resolved
Check Walking Belt
Alignment (refer to
"Aligning the Walking Belt"
in Owner's Manual.
Is the Walking Belt
centered on the
Walking Deck?
Run the Belt at
YES
low speed and attempt
to stop the Belt with your
foot. Does Belt
YES
Shut off machine and wait
present? 5 minutes. Remove Motor
NO
Is the Drive Belt
Refer to "Replace the
Drive Belt" procedure in
the service manual to
adjust the Drive Motor Belt
Is the issue still
NO
NO
YES
slip?
NO
Cover.
Contact Customer Care
YES
or your local distributor
tight?
(if outside US/Canada).
NO
tension.
present?
29
Align the Walking Belt
NO
Can Belt be
aligned?
YES
NO
Is the issue still
present?
YES
(if inside US/Canada)
YES
Replace Rear Roller
Issue resolved