Bowflex BXT6 Service Manual page 26

Console Issues (
page 2 of 2
If Console will not light up, follow
"Unit will not power on" Troubleshooting
Procedure.
BEGIN HERE:
If the units of measure are incorrect, follow the
Owner's Manual instructions to correct the
setting before beginning these steps.
Fan will not turn on or off.
Turn machine power off
for 5 minutes and retry.
Unplug machine from
power source and remove
any blockages, then reset.
Replace Console if
blockage cannot be
removed or if fan still does
not turn off.
)
Speed is incorrect.
Refer to the Owner's
Manual "Console Setup
Mode", ensure that the
correct units of measure
are set.
Disconnect machine from
power for 1 minute, then
follow Service Mode
Procedure 3 to reset the
Console.
NO
Is the issue still
present?
YES
Follow Service Mode
Procedure 2 to check
firmware version and error
codes.
Contact Customer Care
(if inside US/Canada)
or your local distributor
(if outside US/Canada).
26
Console continuously
cycles through program
screens.
Console is in demonstra-
tion mode. Hold down the
PAUSE/STOP button and
Down arrow button
together for 3 seconds.
Issue resolved