Reverse Solenoid Removal - Lexmark B2650 Service Manual

4
Remove the screw (C).
5
Remove the fuser actuator.
Installation note: To test if the actuator is properly installed, push, and then release the actuator (A). The
actuator should bounce back.

Reverse solenoid removal

1
Remove the right cover. See
2
Remove the left cover. See
3
Remove the rear cover. See
A
"Right cover removal" on page
"Left cover removal" on page
"Rear door and cover removal" on page
Parts removal
183
C
186.
177.
234.
4600-830, -835, -895