Procedure For Replacing The Key Battery - Fiat Fullback Single cab Owner's Manual

NOTE The key switch will operate
within approximately 4 m from the
vehicle. However, the operating range
of the key switch may change if the
vehicle is located near a TV transmitting
tower, power station, or radio
broadcasting station.
NOTE If either of the following
problems occurs, the battery may be
exhausted.
The key switch is operated at the
correct distance from the vehicle, but
the doors are not locked/unlocked in
response.
The indicator lamp (3) is dim or does
not come on. For further information,
please contact a Fiat Dealership. If you
replace the battery yourself, refer to
"Procedure for replacing key battery".
NOTE If your key is lost or damaged,
please contact a Fiat Dealership for a
replacement key.
NOTE If you wish to add key, please
contact a Fiat Dealership. The following
numbers of the keys are available:
Keyless entry key: up to 4 keys
Keyless operation key: up to 4 keys.
16
Procedure for replacing the key
battery
1)
3)
Before replacing the battery, remove
static electricity from your body by
touching a metal grounded object.
NOTE You may purchase a
replacement battery at an electric
appliance store.
Fiat Dealership can replace the battery
for you if you prefer.
1. Remove the screw (A) from the key
(Keyless Entry Key only).
10
2. With the Fiat mark facing you, insert
the cloth-covered tip of a straight blade
(or minus) screwdriver into the notch in
the key case and use it to open the
case.
11
12
NOTE Be sure to perform the
procedure with the Fiat mark facing
AHA106809
you. If the Fiat mark is not facing you
when you open the key case, the
switches may come out.
3. Remove the old battery.
4. Install a new battery with the + side
(B) up.
AHA109044
AHA109057