Installing A Child Restraint System To The Lower Anchorage; Lower Anchorage Location; Tether Anchorage Location; Child Restraint Systems With Isofix Mountings - Fiat Fullback Single cab Owner's Manual

Installing a child
restraint system to the
lower anchorage
(ISOFIX child restraint
mountings) and tether
anchorage (Double cab)

Lower anchorage location

Your vehicle's rear seat is fitted with
lower anchorages for attaching a child
restraint system with ISOFIX mountings.
207
208
124

Tether anchorage location

There are 2 child restraint anchorage
points on the vertical panel, located
behind the rear seat.
These are for securing a child seat
tether strap to each of the 2 rear
seating positions in your vehicle.
209
159)
AHA106607
Child restraint systems
with ISOFIX mountings
(Double cab)
The child restraint system is designed
only for seats that incorporate lower
anchorages. Retain the child restraint
system using the lower anchorages.
It is not necessary to retain the child
restraint system using the vehicle's seat
belts.
AHA106229
210
A. Child restraint system connectors
To install
1. Remove any foreign material in or
around the connectors and ensure the
vehicle seat belt is in its normal storage
position.
AHA104759
2. Remove the head restraint from the
location in which you wish to install a
child restraint. Refer to "Head
restraints".
3. Push the child restraint system's
connectors (A) into the lower
anchorages (B) in accordance with the
instructions provided by the child
restraint system's manufacturer.
AA0014302