Ipv6 Internet Configuration And Status Check - NETGEAR MBR1515 User Manual

IPv6 Internet Configuration and Status Check

The IPv6 screen allows you to configure and check the status of your IPv6 Internet
connection.
¾
To configure the Internet connection type:
1. From the main menu, under Advanced, select IPv6. The IPv6 Configuration screen
displays.
The default setting is Disabled, which turns off the IPv6 function.
2. Select the IPv6 Internet connection type you want to use, which should be provided by your
ISP.
• 6to4 Tunnel. If your ISP does not provide a specific IPv6 connection, select 6to4
Tunnel.
This screen specifies the remote relay router to which your router creates the 6to4
tunnel. If your ISP provides the address of its own relay router, you can put it here.
You can also leave it as Auto, and the router will use any address that is available.
Note: The 6to4 tunnel connection needs the IPv4 Internet connection to be
up first.
In the LAN Setup section, enter the requested information:
- Router's IPv6 Address on LAN. This shows the IPv6 address acquired for the
router's LAN interface. The number after the slash (/) is the length of the prefix,
which is also roughly indicated by the underline (_) under the IPv6 address.
LTE Broadband 11n Wireless Router MBR1515
Advanced
81