Setting Wep Encryption - Belkin Vision Wireless Router N1 User Manual

Using the Web-Based Advanced User Interface

Setting WEP Encryption

Note to Mac users:
Apple AirPort . To configure encryption for your Mac computer, set the
® ®
encryption using the manual method described in the next section.
1.
Select "128-bit WEP" or "64-bit WEP" from the drop-down menu.
2.
After selecting your WEP encryption mode, you can enter your
WEP key manually by typing in the hex values in the space
provided, or you can type a passphrase in the "PassPhrase" field
and click "Generate" to create a WEP key from the passphrase.
Click "Apply Changes" to finish. You must now set all of your
clients to match these settings.
3.
Encryption in the N1 Vision is now set. Each of your computers
on your wireless network will now need to be configured with the
same passphrase. Refer to the documentation of your wireless
network adapter for information on making this change.
The "Passphrase" option will not operate with
59 59
1
2
3
4
5
6
7
8
9
10