Belkin Vision Wireless Router N1 User Manual page 54

Using the Web-Based Advanced User Interface
Changing the Wireless Channel
There are a number of operating channels from which you can
choose—in the United States, there are 11 and in the United Kingdom
(and most of Europe), there are 13. In a small number of other countries,
there are other channel requirements. Your N1 Vision is configured to
operate on the proper channels for the country in which you reside. The
channel can be changed if needed. If there are other wireless networks
operating in your area, your network should be set to operate on a
channel that is different than the other wireless networks.
Using the Wireless Mode Switch
This switch allows you to set the N1 Vision's wireless modes. There are
several modes.
Note: Some modes may require firmware updates to be enabled.
1)
802.11b+g+n
Setting the N1 Vision to this mode will allow 802.11b-, 802.11g-, and
802.11n-compliant devices to join the network.
2)
Off
This mode will turn OFF the N1 Vision's access point, so no
wireless devices can join the network. Turning off the wireless
function of your N1 Vision is a great way to secure your network
when you are away from home for a long period of time, or don't
want to use the wireless feature of the N1 Vision at a certain time.
50 50