Viewing The Dhcp Client List Page; Configuring The Wireless Network Settings - Belkin Vision Wireless Router N1 User Manual

Using the Web-Based Advanced User Interface

Viewing the DHCP Client List Page

You can view a list of the computers (known as clients), which are
connected to your network. You are able to view the IP address
the computer, the host name
one), and the MAC address
card (NIC). Pressing the "Refresh"
there have been any changes, the list will be updated.
(1)

Configuring the Wireless Network Settings

The "Wireless" tab lets you make changes to the wireless network
settings. From this tab you can make changes to the wireless network
name or Service Set Identifier (SSID), operating channel, encryption
security settings, and configure the N1 Vision to be used as an
access point.
(2)
(if the computer has been assigned
(3)
of the computer's network interface
(4
) button will update the list. If
(2) (3)
48 48
(1)
(4)
of