Belkin Vision Wireless Router N1 User Manual page 104

Troubleshooting
Do Belkin products support WPA?
Note:
To use WPA security, all your clients must be upgraded
to drivers and software that support it. At the time of this FAQ
publication, a security patch download is available, for free,
from Microsoft. This patch works only with the Windows XP
operating system.
Download the patch here:
http://www.microsoft.com/downloads/details.
You also need to download the latest driver for your Belkin Wireless
Network Card from the Belkin support site. Other operating systems
are not supported at this time. Microsoft's patch only supports
devices with WPA-enabled drivers such as Belkin N1 products
Download the latest driver at http://web.belkin.com/support
for the following products:
F5D8001, F5D8011, F5D5051, F5D8071
I am having difficulty setting up Wireless Protected Access (WPA)
security on my Belkin N1 Vision for a home network.
1.
From the "Security Mode" drop-down menu, select "WPA-PSK
(no server)".
2.
For "Encryption Technique", select "TKIP". This setting will have
to be identical on the clients that you set up.
3.
Enter your pre-shared key. This can be from eight to 63
characters and can be letters, numbers, symbols, or spaces.
This same key must be used on all of the clients that you set up.
For example, your PSK might be something like: "Smith family
network key".
4.
Click "Apply Changes" to finish. You must now set all clients to
match these settings.
100 100