Daikin FTK09NMVJU Service Manual page 8

Electrical Box
Step
2 Pull out the indoor heat
exchanger thermistor.
3 Release the earth /
ground wires and the
thermistor harness from
the front and the back
slits at the top of the
electrical box.
4 Unfasten the 4 hooks
and remove the
electrical box cover.
6
Procedure
Indoor heat exchanger thermistor
Earth / ground wire Thermistor harness
Electrical box
Electrical box cover
Be careful not to lose the clip
of the thermistor.
Clip
The position of the indoor
(R21831)
heat exchanger thermistor
varies depending on the
model.
When reassembling, be sure
Slit
to insert the earth / ground
wires in the front slit and
yellow / green wire is above
the green wire and insert the
thermistor harness in the
back slit.
Front slit
(R21832)
Green
Yellow / green
When reassembling, make
sure that the 4 hooks are
securely fastened.
Hook
(R21833)
Si041552E
Points
(R11268)
Back slit
Thermistor
harness
(R21857)
Removal Procedure