Chapter 1 Important Information; Handbook Information; Certified Installation - Raymarine E12207 Installation Instructions Manual

Chapter 1: Important information

Handbook information

This handbook contains important information regarding the
Hydraulic Linear Drives.
The handbook is for use with the following models:
Part number Type
E12207 (replaces Type 2
M81200)
E12208 (replaces Type 2
M81201)
M81202 Type 3
M81203 Type 3
Additional handbooks
The following handbooks provide additional information relating to
the operation of the Hydraulic Linear Drive, and compatible course
computers.
Description
SPX System Installation guide
SPX System Commissioning
Instructions
SeaTalk ng Reference Manual
Important information
Voltage
12 V
24 V
12 V
24 V
Part number
87072
81287
81300

Certified Installation

Raymarine recommends certified installation by a Raymarine
approved installer. A certified installation qualifies for enhanced
product warranty benefits. Contact your Raymarine dealer for
further details, and refer to the separate warranty document packed
with your product.
Warning: Product installation and
operation
This product must be installed and operated in
accordance with the instructions provided. Failure to
do so could result in personal injury, damage to your
boat and/or poor product performance.
Warning: Switch off power supply
Ensure the boat's power supply is switched OFF
before starting to install this product. Do NOT connect
or disconnect equipment with the power switched on,
unless instructed in this document.
Warning: Entrapment hazard
This product features moving parts that provide a
potential entrapment hazard. Keep clear of moving
parts at all times.
Warning: Do NOT flash test
Do NOT perform an electrical flash test on this product.
7