Raymarine E12207 Installation Instructions Manual page 23

Push rod and tiller arm
The push rod must be accurately aligned with the tiller arm plane
of rotation. The ball end fitting only allows the following degrees of
misalignment between the push rod and tiller arm plane of rotation:
• Type 2 drive: 10 degrees.
• Type 3 drive: 5 degrees.
The following diagrams illustrate the degree limit for each type of
drive. The diagrams show a view from astern.
Type 2:
Type 3:
Mounting
Note: Accurate angular alignment of the hydraulic ram is
extremely important. You must NOT exceed the specified degree
alignment limits under any circumstances.
10º
10º
D 11900-1
5º
5º
D 11858-1
23