Yamaha MODX7 Reference Manual page 75

Reference
Performance
Effect
Routing
From the Routing display you can determine the Effect connections for Parts.
[PERFORMANCE (HOME)]  [EDIT]  Part selection  Element [Common]  [Effect] [Routing]
Operation
Ins FX SW
Element 1–8 (Element Connection Switch)
Determines which Insertion Effect (A or B) is used to process each individual Element. The "Thru" setting
lets you bypass the Insertion Effects for the specified element.
Settings: Thru, InsA (Insertion Effect A), InsB (Insertion Effect B)
Insertion FX Switch (Insertion Effect Switch)
Determines whether the Insertion Effect A/B is active or not.
For Parts 9-16, the Ins FX SW is shown at the center of the page, and the Insertion effect of the currently
being edited Part can be switched ON or OFF.
Settings:
Off, On
Category (Effect Category)
Type (Effect Type)
Determines the category and type for the selected Effect.
Settings: For details on the editable Effect categories and types, see the Data List PDF document. Also, for details on the
description for each Effect type, see the Synthesizer Parameter Manual PDF document.
Preset
Allows you to call up pre-programmed settings for each Effect type, designed to be used for specific
applications and situations. You can change how the sound is affected by the selected pre-programmed
settings.
Settings: For a list of all Preset Effects, see the Data List PDF document.
MODX Reference Manual
Edit
Normal Part (AWM2)
Insertion FX A Switch
Insertion FX B Switch
Search
Drum Part Normal Part (FM-X)
Utility Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
75