Utility; Sound - Yamaha MODX7 Reference Manual

Reference
Performance

Utility

The Utility display has four tabs; the Setting tab, the Contents tab, the Tempo Settings tab, the Effect
Switch tab, and the Other Info tab. You can make various settings for the entire system.
Settings

Sound

From the Sound display you can make overall settings for the sounds output from the instrument.
[UTILITY]  [Settings]  [Sound]
Operation
Tone Generator Volume
Determines the overall volume of the instrument.
Settings: 0–127
Tone Generator Note Shift
Determines the amount (in semitones) by which the pitch of all notes is shifted.
Settings:
-24semi – +24semi
Tone Generator Tune
Determines the fine tuning of the instrument's overall sound (in 0.1 cent steps).
Settings: -102.4 – +102.3
Sustain Pedal (Foot Switch Sustain Pedal Select)
Selects the Foot switch type connected to the FOOT SWITCH [SUSTAIN] jack on the rear panel.
• When the FC3 or FC3A is used:
When you connect an optional FC3 or FC3A (equipped with the half-damper feature) for producing
the special "half-damper" effect (as on a real acoustic piano), set this parameter to "FC3A (Half on)."
If you don't need the half-damper feature or want to disable it while still using an FC3 or FC3A, set
this parameter to "FC3A (Half off)."
• When the FC4, FC4A, or FC5 is used:
Select "FC4A/FC5." The FC4, FC4A, and FC5 are not equipped with the half-damper feature.
Settings:
FC3A (Half On), FC3A (Half Off), FC4A/FC5
NOTE Note that this setting is not necessary when controlling the half-damper feature via Control Change messages
from an external MIDI device to the instrument.
MODX Reference Manual
Edit Search Utility Live Set
Uitlity
Settings
Sound
Quick Setup
Audio I/O
MIDI I/O
Advanced
System
Contents
Load
Store / Save
Data Utility
Library Import
Tempo Settings
Effect Switch
Other Info
Shift Function
Legal Notices
187