Motion Sequencer Block
The powerful Motion Sequencer feature lets you dynamically change sounds by operating Parameters
depending on sequences created in advance.
It provides real time control for changing sounds depending on various sequences such as Tempo,
Arpeggio, or the rhythm of external connected devices.
You can assign up to eight desired Sequence types for one Lane.
You can also set up to four Lanes corresponding to the Motion Sequencer function for one Part. Up to eight
Lanes can be used at the same time for the entire Performance.
The setting status (on or off) the Lanes in the entire Performance will be shown as follows.
[PERFORMANCE (HOME)] [Motion Control] [Motion Seq]
Also, the parameters for each Lane are set as follows.
[PERFORMANCE (HOME)] [EDIT] Part selection Element/Operator [Common] [Motion Seq]
[Lane]
(page
91)
Selected Sequence setting
Turning the Motion Sequencer on/off
The following settings are available for turning the Motion Sequencer playback on/off.
To play the Motion Sequence when the note is
pressed:
To play the Motion Sequence when the
[MOTION SEQ TRIGGER] button is pressed:
NOTE
"LaneSW" and "Trigger" are set as follows.
[EDIT] Part selection Element/Operator [Common] [MOTION Seq] [Lane]
MODX Reference Manual
(page
44)
Lane setting
Set the "LaneSW" parameter to "On," the "Trigger"
parameter to "Off," and the" Sync" parameter to "Off."
Set the "LaneSW" parameter to "On," the "Trigger"
parameter to "On," and the "Sync" parameter to "Off."
Sequence Patterns for the Lane
Lane setting
(page
91)
Basic Structure
Functional blocks
Tone Generator block
A/D Input block
Sequencer block
Arpeggio block
Motion Sequencer block
Effect block
Envelope Follower block
Controller block
Internal Memory
Reference
Display (touch panel) config.
Performance Play (Home)
Motion Control
Mixing
Scene
Play/Rec
Normal Part (AWM) Edit
Drum Part Edit
Normal Part (FM-X) Edit
Common/Audio Edit
Category Search
Utility
Live Set
iPhone/iPad connection
17