Resonance; Cutoff/Key (Cutoff Key Follow Sensitivity); Center Key (Cutoff Key Follow Sensitivity Center Key); Res/Vel (Resonance Velocity Sensitivity) - Yamaha MODX7 Reference Manual

Reference
Performance

Resonance

Width
This parameter's function varies according to the selected Filter Type. If the selected filter is an LPF, HPF,
BPF (excluding BPFw), or BEF, this parameter is used to set the Resonance. For the BPFw, it is used to
adjust the frequency bandwidth. This parameter is used to set the amount of Resonance (harmonic
emphasis) applied to the signal at the cutoff frequency. This can be used in combination with the "Cutoff"
parameter to add further character to the sound. For the BPFw, this parameter is used to adjust the width
of the band of signal frequencies passed by the filter.
This parameter is not displayed depending on the selected Filter Types.
Settings:
0–127

Cutoff/Key (Cutoff Key Follow Sensitivity)

Determines the degree to which the notes (specifically, their position or octave range) affect the Cutoff
Frequency (above). The Center Key (next parameter) is used as the basic Cutoff Frequency for this
parameter.
Settings: - 200% – +200%
Positive values:
Negative values:

Center Key (Cutoff Key Follow Sensitivity Center Key)

This indicates that the central note for "Cutoff/Key" above is C3. Keep in mind that this is for display
purposes only; the value cannot be changed.
Gain
Sets the Gain (the amount of boost applied to the signal sent to the Filter Unit).
 In case of the Filter Type with "Distance" and "Res/Vel" parameters
Distance
Determines the distance between the Cutoff Frequencies for the Dual Filter types and the LPF12+BPF6
filter. This parameter is not displayed depending on the selected Filter Type.
Settings:
-128 – +127

Res/Vel (Resonance Velocity Sensitivity)

Determines the degree to which Resonance responds to Velocity, or the strength with which you play
notes. This parameter is not displayed depending on the selected Filter Type.
Settings:
-64 – +63
Positive values:
Negative values:
0: No change of the Resonance value.
MODX Reference Manual
Edit
Normal Part (AWM2)
The Cutoff Frequency drops for lower notes and rises for higher notes.
The Cutoff Frequency rises for lower notes and drops for higher notes.
The higher the Velocity, the greater the Resonance.
The lower the Velocity, the greater the Resonance.
Search
Drum Part Normal Part (FM-X)
Utility Live Set
Common/Audio
Normal Part (AWM2) Edit
Common
Part Settings
General
Pitch
Zone Settings
Zone Transmit
Effect
Routing
Ins A
Ins B
EQ
Ins Assign
Arpeggio
Common
Individual
Advanced
Motion Seq
Common
Lane
Mod / Control
Part LFO
Control Assign
Receive SW
Element
Osc / Tune
Pitch EG
Filter
Type
Filter EG
Scale
Amplitude
Level / Pan
Amp EG
Scale
Element LFO
Element EQ
All Element
Osc
Balance
Copy or Exchange
Elements
116