Brother MFC Series Service Manual page 18

If water, other liquids, or metal objects get inside the machine, immediately unplug the machine
from the AC power outlet.
DO NOT connect the machine to a DC power source or inverter. If you are not sure what kind of
power source you have, contact a qualified electrician.
Power Cord Safety:
• DO NOT pull on the middle of the AC power cord; pulling on the middle may cause the
cord to separate from the plug. Doing this might cause an electrical shock.
• DO NOT allow anything to rest on the power cord.
• DO NOT place this machine where people can walk on the cord.
• DO NOT place this machine in a position where the cord is stretched or strained, as it may
become worn or frayed.
• DO NOT use the machine or handle the cord if the cord has become worn or frayed.
If unplugging your machine, DO NOT touch the damaged/frayed part.
• Brother strongly recommends that you DO NOT use any type of extension cord.
• DO NOT use any cable, not included with this product, that does not meet the applicable
cable specifications described in the Quick Setup Guide.
It may cause a fire or injuries. Installation must be performed properly according to the
Quick Setup Guide.
DO NOT use this product during an electrical storm.
(MFC models only)
Never touch telephone wires or terminals that are not insulated unless the telephone line has
been unplugged at the wall jack. Never install telephone wiring during a lightning storm. Never
install a telephone wall jack in a wet location.
FIRE HAZARDS
Failure to follow the warnings in this section may create the risk of a fire.
DO NOT use flammable substances, any type of spray or an organic solvent/liquid that contains
alcohol or ammonia to clean the inside or outside of the machine. Doing this may cause a risk of
fire or electrical shock.
xv Confidential