Table of Contents
Advertisement
Head/carriage Unit Inclination Adjustment Test Pattern
2.5
Adjustment of Software Correction for Inclination/Corrugation/Ruled
Lines (Maintenance mode 65)
Refer to
Chapter 5 "1.4.20 Adjustment of Vertical Print Lines/Software Correction for
Inclination/Corrugation/Ruled Lines (Maintenance mode 65)"
software correction for inclination/corrugation/ruled lines.
2.6
Update the Paper Feeding Correction Values (Maintenance mode 58)
Refer to
Chapter 5 "1.4.17 Updating of Paper Feeding Correction Value (Maintenance
mode 58)"
for details on the execution.
2.7
Margin Adjustment in Borderless Printing (Maintenance mode 66)
Refer to
Chapter 5 "1.4.21 Margin Adjustment in Borderless Printing (Maintenance mode
66)"
for details on the execution.
2.8
Write Head Calibration Data (Maintenance mode 02)
Refer to
Chapter 5 "1.4.2 Creating of Head Calibration Data and Writing it into Flash ROM
(Maintenance mode 02)"
for details on the execution.
4-15
for details on how to adjust
Confidential
Advertisement
Chapters
Table of Contents
Troubleshooting
